Plant repairs near me

Plant Repairs Near Me: Ten Things to Check Before You Ring an Engineer

If you have typed “plant repairs near me” into your phone this morning, you are almost certainly standing next to a machine that will not do what it is supposed to do, with a job going nowhere and a crew waiting on you.

We are Favell Mobile Plant Repairs. We cover North Lincolnshire and the surrounding area, we come to you, and we would rather you rang us than struggled on.

Call 07841 761758  Email favell_plant@outlook.com.

But before you do, work through this list. A fair proportion of the callouts we attend turn out to be something on it, and we would rather tell you that up front than turn up, spend two minutes on it and leave you with a bill. If it is on this list you can be working again in ten minutes. If it is not, ring us and we will come out.

The ten checks

1. The battery isolator. It sounds daft and it is genuinely one of the most common causes of a machine that is completely dead. Somebody turned it off at the end of the shift, or it has been knocked. Check it before anything else.

2. Battery terminals and charge. Corroded, loose or dirty terminals will stop a machine that has plenty of charge in the batteries. If it turns over slowly, or clicks and does nothing, start here. Machines that have sat over a wet weekend are the usual suspects.

3. Fuel level, and where the gauge actually is. Gauges on older machines lie, and they lie in the direction that leaves you stranded. If there is any doubt, dip it.

4. Water or contamination in the fuel. Check and drain the water separator. Diesel bug and water in fuel cause rough running, loss of power and no starts, and they are far more common than people expect on machines that sit for periods or run on site tanks.

5. Blocked fuel filters. If the machine starts, runs, then dies under load, or will not rev out, a clogged filter is a likely candidate. Worth knowing when yours were last changed.

6. AdBlue level and quality. On anything Stage IV or Stage V, a low or contaminated AdBlue tank will derate the machine or stop it outright, and the warning is easy to miss. AdBlue also degrades in heat and has a shelf life, so old stock in a drum in the corner of the yard can cause exactly the fault you are looking at.

7. Safety interlocks. Armrest up, seat switch, park brake, lever lock, door switch. Every one of them is designed to stop the machine doing anything, and every one of them fails eventually. If the engine runs but nothing moves, this is where to look first.

8. Hydraulic oil level and temperature. Slow, weak or unresponsive hydraulics with the engine running normally usually means oil level, a blocked return filter, or oil that is stone cold on a frosty morning. Check the sight glass before assuming a pump.

9. Fuses and relays. One blown fuse takes out a circuit and the symptom often looks nothing like an electrical fault. Cheap to check and cheap to carry spares for.

10. Write down the error codes. If the machine is displaying codes, photograph the screen before you clear anything. Those codes tell us what to bring and can be the difference between a same day fix and a return visit for parts. Even if you fix it yourself, keep a note, because a code that comes back is telling you something.

If it is none of those, ring us

That is what we are here for. Ring 07841 761758 , tell us where you are, what the machine is, what it is doing and what codes it is showing, and we will get to you.

If it is less urgent, email favell_plant@outlook.com with the machine details and we will come back to you.

We carry out mobile plant repairs across North Lincolnshire and the surrounding area, covering Scunthorpe, Brigg, Barton upon Humber, Broughton, Winterton, Messingham, Bottesford, Kirton in Lindsey, Epworth, Crowle, Immingham, Caistor, Market Rasen, Gainsborough and the towns and villages around them.

We work on construction, agricultural and materials handling machinery. Excavators, telehandlers, loading shovels, dumpers, forklifts, tractors and the rest of it. JCB equipment is our specialism, but we are not restricted to it.

The repairs you can avoid altogether

Breakdown work pays our wages, and we would still rather you had fewer breakdowns. Machines that are serviced on schedule break down less, hold their value better and cost less to run. That is not a sales line, it is just how it works.

Servicing on a proper cycle. Oils, filters, greasing and inspection at the right intervals for the machine and the hours it is doing. We can set up a schedule and turn up without you having to remember.

LOLER inspections. If it lifts, it is legally required to be thoroughly examined at set intervals. Telehandlers, excavators used for lifting, forklifts, cranes and lifting accessories. Six months for equipment lifting people or lifting accessories, twelve months for most other lifting equipment, or to a written scheme of examination. Missing one is not a technicality, it is a legal problem and an insurance problem, and it is the sort of thing that surfaces at exactly the wrong moment.

Air conditioning. Most people leave this until the first hot week, then everybody in the county wants it doing at once. Air con systems lose refrigerant gradually every year whether you use them or not, and a cab that is thirty five degrees is a genuine safety issue, not just a comfort one. A tired, overheated operator makes mistakes. Get it looked at in spring, not in July.

The right parts and the right oils. Using whatever oil was in the shed is a false economy on modern machines with tight tolerances and emissions systems that care what goes through them. We supply parts and lubricants to the correct specification.

Common questions

How quickly can you get to me?
It depends on where you are and what is already booked, but we will give you a straight answer when you ring rather than an optimistic one. A realistic time lets you plan the day. A hopeful one wastes it.

Do you come to site or do I bring the machine to you?
We come to you. That is the point of a mobile service. Farm, site, yard or roadside.

What makes do you work on?
Construction, agricultural and materials handling equipment across the makes. JCB is our specialism.

How often does a machine need a LOLER inspection?
Twelve months for most lifting equipment, six months for equipment that lifts people and for lifting accessories, or as set out in a written scheme of examination. If you are unsure what applies to your kit, ring and ask. It is a short conversation and it is better than finding out afterwards.

Can you set up regular servicing rather than us ringing each time?
Yes, and it is the sensible way to do it. We schedule it, we turn up, and you stop having to remember.

Do you supply parts?
Yes, parts and lubricants to the correct specification for the machine.

Which areas do you cover?
North Lincolnshire and the surrounding area. If you are not sure whether you are in range, ring 07841 761758 and ask. The answer is usually yes.

Get the machine going again

Ring us, tell us where you are and what it is doing, and we will get to you.

If it is not urgent, get in touch about servicing, LOLER inspections or air con before it becomes urgent. That is always the cheaper conversation.

Favell Mobile Plant Repairs Ltd
Mobile: 07841 761758

Email: favell_plant@outlook.com
Web: www.favellplantrepairs.co.uk

Mobile plant repairs, servicing, LOLER inspections, air conditioning, parts and lubricants across North Lincolnshire.

[Call 07841 761758] [Book a service] [Arrange a LOLER inspection]

Leave a Reply

Your email address will not be published. Required fields are marked *